Overview of AFM Operation

This section provides a comprehensive overview of the steps required to capture image data using the MultiMode 8. Additional information is provided elsewhere in the User Manual with procedures specific for each of the various Imaging Modes.

In general, AFM operation is divided into several sequential procedures:

1. Select Experiment
2. Prepare and Load the Sample
3. Prepare and Load the Probe Holder
4. Align the Laser
5. Maximize the SUM Signal

When working in TappingMode, the next step at this point is to tune the cantilever. See Manual Cantilever Tuning for more information.

6. Check Initial Scan Parameters
7. Engage, Scan, & Withdraw

Related Topics

Open topic with navigation